Showing posts with label curt manufacturing. Show all posts
Showing posts with label curt manufacturing. Show all posts

10/14/2012

Sportsman Series FCCHM 400 lb Steel Folding Cargo Carrier Review

Sportsman Series FCCHM 400 lb Steel Folding Cargo Carrier
Average Reviews:

(More customer reviews)
This carrier was damaged in three places, the metal looks very thin and poor quality. Bent so badly that it could not be assembled. Sent it back.

Click Here to see more reviews about: Sportsman Series FCCHM 400 lb Steel Folding Cargo Carrier



Buy NowGet 37% OFF

Click here for more information about Sportsman Series FCCHM 400 lb Steel Folding Cargo Carrier

Read More...

7/26/2012

Surco 1204 Hauler Basket Carrier Review

Surco 1204 Hauler Basket Carrier
Average Reviews:

(More customer reviews)
[...]
Out of the box this item was not square, even, or the same size where it should have been. The basket was bent and sagged to the right with no weight on it. Two of the perimeter bars on the right side were longer then the left so one side was wider than the other. One of the angled support (flat bars) underneath was bent. Once I put two full coolers its sagged dangerously but held. It barely fits two normal size coolers causing them to be canted sideways to fit. The unit should of been made a little bit wider and a few inches longer and of heavier gauge steel but for 155 bucks you get what you pay for. I have had SURCO products for years but their QC has gone down hill and it shows in their products. They appear to be made fast with cheap materials by unskilled labor!

Click Here to see more reviews about: Surco 1204 Hauler Basket Carrier



Buy NowGet 29% OFF

Click here for more information about Surco 1204 Hauler Basket Carrier

Read More...

6/30/2012

Pro Series 6500 Black 48" x 20" Hitch Mounted Cargo Carrier Review

Pro Series 6500 Black 48 x 20 Hitch Mounted Cargo Carrier
Average Reviews:

(More customer reviews)
Use this on a Toyota Matrix. Easy to put together and attach/remove to/from the hitch. Heavy duty. Lots of holddown holes for strapping. I don't max out the max load capacity because I only have a class I hitch, but I have no doubts the carrier would handle it.

Click Here to see more reviews about: Pro Series 6500 Black 48" x 20" Hitch Mounted Cargo Carrier



Buy NowGet 28% OFF

Click here for more information about Pro Series 6500 Black 48" x 20" Hitch Mounted Cargo Carrier

Read More...

4/29/2012

Curt Manufacturing 13445 Class III Receiver Review

Curt Manufacturing 13445 Class III Receiver
Average Reviews:

(More customer reviews)
Well made, accuratelt placed holes, easy to install. The only hard part was removing the towing hook from my car.

Click Here to see more reviews about: Curt Manufacturing 13445 Class III Receiver



Buy NowGet 45% OFF

Click here for more information about Curt Manufacturing 13445 Class III Receiver

Read More...

4/17/2012

Curt Manufacturing 12284 Class II Receiver Review

Curt Manufacturing 12284 Class II Receiver
Average Reviews:

(More customer reviews)
great quality, great price. Built well, and will work great for a hitch mount bike rack, the reason I purchased. Highly recommended!

Click Here to see more reviews about: Curt Manufacturing 12284 Class II Receiver



Buy NowGet 49% OFF

Click here for more information about Curt Manufacturing 12284 Class II Receiver

Read More...

4/16/2012

Curt Manufacturing 13344 Class III Receiver Review

Curt Manufacturing 13344 Class III Receiver
Average Reviews:

(More customer reviews)
Installation was straight forward and as easy as I hoped it would be. 5 stars for the hitch.
HOWEVER, the packaging was some of the worst I've ever seen. Pretty much 50 pounds of steel in an oversized box with about 5 feet of crumpled butchers paper for cushion. The box had several puncture marks and part of the unit was hanging out of the box when UPS dropped it on my step. Luckily the hardware kit was in a bag large enough not to escape and even with the bumps and bruises the finish on the hitch was not affected. Have to give ZERO stars for packaging.

Click Here to see more reviews about: Curt Manufacturing 13344 Class III Receiver



Buy NowGet 46% OFF

Click here for more information about Curt Manufacturing 13344 Class III Receiver

Read More...

4/10/2012

Curt Manufacturing 13831 Class III Receiver Review

Curt Manufacturing 13831 Class III Receiver
Average Reviews:

(More customer reviews)
Bolted up easily, but the tailpipe only has about 1/4" of clearance against the hitch. When I accelerate quickly in 1st gear or go over bumps, it rattles from making contact. I feel like a custom fit hitch should have more clearance so it doesn't make noise. It's embarrassing, but I'll figure out a way to take care of it...

Click Here to see more reviews about: Curt Manufacturing 13831 Class III Receiver



Buy NowGet 40% OFF

Click here for more information about Curt Manufacturing 13831 Class III Receiver

Read More...

4/01/2012

Curt Manufacturing 11294 Class I Receiver Review

Curt Manufacturing 11294 Class I Receiver
Average Reviews:

(More customer reviews)
Four bolt installation is pretty straight forward. I had to purchase a 1/2" drill bit to drill one hole in the frame for my thee door Focus, but this was not difficult and something I would have had to do with any hitch, though that kept me from giving five stars. Well built sturdy construction, but you will need to purchase a ball.

Click Here to see more reviews about: Curt Manufacturing 11294 Class I Receiver



Buy NowGet 47% OFF

Click here for more information about Curt Manufacturing 11294 Class I Receiver

Read More...

2/14/2012

Curt Manufacturing 13280 Class III Receiver Review

Curt Manufacturing 13280 Class III Receiver
Average Reviews:

(More customer reviews)
I ordered one for my Dodge Dakota. It fit perfectly. No drilling just put in place and bolted to my side wall frame.

Click Here to see more reviews about: Curt Manufacturing 13280 Class III Receiver



Buy NowGet 46% OFF

Click here for more information about Curt Manufacturing 13280 Class III Receiver

Read More...

2/01/2012

Curt Manufacturing 13310 Class III Receiver Review

Curt Manufacturing 13310 Class III Receiver
Average Reviews:

(More customer reviews)
I installed the Curt 13310 on my 2000 Dodge Ram full size 1/2 ton pickup. The instructions said I might need to adjust the bumper and that I would have to drill some 1/2" bolt holes. I didn't need to do either. Everything fit perfectly. I installed this hitch by myself in about 20 mins. It couldn't have been easier. I recommend putting thread locker on the bolts before you tighten them. The hitch looks great. The only thing visible from the back of the truck is the receiver part. And best of all, it's made in the good old USA.

Click Here to see more reviews about: Curt Manufacturing 13310 Class III Receiver



Buy NowGet 48% OFF

Click here for more information about Curt Manufacturing 13310 Class III Receiver

Read More...

1/19/2012

SportRack A21120B Hitch Basket Bag Review

SportRack A21120B Hitch Basket Bag
Average Reviews:

(More customer reviews)
Finally used my hitch basket and the bag for a trip. It holds a good bit, very well made and kept my items clean and dry. You can easily fit a full sized suitcase and a smaller one on the bottom, and additional gear on top of the suitcases and still zip the bag up.

Click Here to see more reviews about: SportRack A21120B Hitch Basket Bag

Durable and attractive cargo bag organizes and protects cargo while nesting perfectly in the SportRack A30850 Folding Hitch Basket

Buy NowGet 10% OFF

Click here for more information about SportRack A21120B Hitch Basket Bag

Read More...

12/17/2011

Pro Series 63154 Black 48" x 20" Hitch Mounted Cargo Carrier Review

Pro Series 63154 Black 48 x 20 Hitch Mounted Cargo Carrier
Average Reviews:

(More customer reviews)
Got it now, put it together (3 bolts + Nuts), looks like the photos here on Amazon. Here are the facts; The "Product Features" listed as of this review have the specs correct. However, the "Product Description" is wrong. This fits a 1-1/4 inch receiver (NOT a 2 inch) with a capacity of 300 pounds (NOT 500 pounds). In the manual that came with this, is does say that if you have a heavy duty (5,000LB) or better rating on the hitch on your vehicle, that this can carry 500lbs, but on the physical rack, it has a safety sticker that reads, "DO NOT EXCEED 300 lbs".
I am just telling you everything to help you make a good buying decision. It does have a good build, looks like it would last for quite a while. So if the specs I listed above fits what you are looking for, I would recommend buying it.

Click Here to see more reviews about: Pro Series 63154 Black 48" x 20" Hitch Mounted Cargo Carrier



Buy NowGet 37% OFF

Click here for more information about Pro Series 63154 Black 48" x 20" Hitch Mounted Cargo Carrier

Read More...